Data Center Fasteners and Anchor Bolts for MEP Contractors
A single hardware failure in a data center build can delay commissioning on a schedule with no slack built in. As a custom bolt manufacturer and wholesale fastener company, we supply the structural hardware that MEP and data center contractors need to keep mission-critical builds moving. We provide high-performance fasteners with the lead times these projects require.
24 Hour Service
Specials are made to order with short lead times.
Same Day Shipping
The Dale Company can ship special orders the same day, including a ’24 hour service’.
Fast Quotes
Let us know about your project and a Dale Company representative will contact you.
Supplying Structural Hardware for Data Center Construction
From white space build-out to electrical infrastructure, data center projects require hardware matched to the load, environment, and installation method. As both a manufacturer and a stocking distributor, we provide a reliable supply chain for new construction and for retrofit and MRO work on existing facilities. Our in-house manufacturing means we can produce custom components to your exact specification without adding weeks to your timeline.
Hardware for Server Racks and Raised Floor Systems
Server racks and raised floor systems carry concentrated loads that depend on a secure connection to the building structure below.
Anchor Bolts for Rack and Floor Anchoring
Our L anchors and custom anchor bolts secure server racks and raised floor pedestals to the slab. We manufacture these to your exact specification, including custom lengths and embedment depths for non-standard floor systems.
Structural Fasteners for Equipment Mounting
CRAC and CRAH units, PDUs, and backup generators generate ongoing vibration that can work standard hardware loose over time. We supply specialty bolts and locknuts designed to hold their torque under continuous mechanical load, keeping critical equipment securely mounted between service intervals.
Fasteners for Cable Tray and Conduit Support
Data centers rely on extensive cable tray and conduit runs to route power and network infrastructure through the facility, and every run depends on properly fastened support hardware.
U-Bolts and J-Bolts for Cable Tray Mounting
Our standard U-bolts and J-bolts are used throughout cable tray and ladder rack installations, connecting tray sections to wall brackets, cabinets, and support channels. We also supply beam clamps for attaching supports directly to structural steel without drilling or welding. We stock these in multiple sizes and finishes to match your tray system and installation method.
Strut Hardware for Conduit and Busway Runs
We supply a complete line of strut hardware for suspending cable tray, conduit, and busway from the structure above. Spring nuts and channel nuts lock into strut channel to anchor these runs, while square washers distribute the load evenly across the connection point. We also stock threaded rod in the lengths and finishes your installation requires.
Corrosion-Resistant Materials for Cooling and Humidity Control
Selecting the correct material is critical for hardware exposed to the moisture and temperature swings inside a data center’s cooling infrastructure. Using a standard finish where corrosion resistance is required can lead to premature fastener failure and unplanned maintenance. We have deep expertise in manufacturing hardware from a range of high-performance materials designed to withstand continuous exposure to condensation and humidity. Our team helps you match the exact material to your facility’s environmental conditions.
- Stainless steel: Grades 304 and 316 resist the moisture generated around CRAC and CRAH units and in mechanical rooms with limited airflow. The addition of molybdenum in 316 gives it added resistance in areas with more persistent condensation exposure.
- Pro-Coat: Our proprietary coating protects carbon steel hardware in areas with recurring condensation exposure, giving you a corrosion-resistant option at a lower cost than solid stainless steel.
- Hot-Dipped Galvanized (HDG): A heavy zinc finish suited to general structural connections outside the immediate cooling footprint, where moisture exposure is minimal.
Your Partner for Data Center MEP Projects
Commissioning delays on a data center build carry real financial consequences, and a missing or incorrect fastener can hold up an entire inspection milestone. We use our in-house manufacturing capabilities to produce structural hardware on demand, so your crews have what they need to hit the schedule rather than wait on it.
Get a Quote for Your Data Center Project
Share your project specifications, timeline, and any material requirements with our team for a fast, accurate quote. Our representatives can also help you identify the right hardware for a build you have not fully specified yet.
FAQs
Server racks and raised floor pedestals are typically secured with anchor bolts set into the concrete slab. The correct anchor length and embedment depth depend on the load rating of the rack or floor system and the specifications set by the structural engineer of record. We manufacture custom anchor bolts to match these specifications when a standard stock size does not fit the application.
In most white space environments, standard finishes like zinc plating or HDG hold up well. Areas with recurring condensation, particularly near CRAC or CRAH units, benefit from 304 or 316 stainless steel or a coated finish like our Pro-Coat, which resists the localized moisture these systems generate. The right choice depends on how close the hardware sits to the cooling equipment and how much airflow the space gets.
Yes. We manufacture on-site in Houston and can ship special orders the same day, including 24 hour service on urgent requests. For retrofit work where an exact replacement part is no longer available, our team can produce a custom match from your existing hardware or a technical drawing.
Need a Custom Fastener Solution?
Request a Quote Today!
Our team is ready to provide a personalized quote for your project needs. Whether you need standard or custom fasteners, we have the expertise and quality products to meet your requirements. Contact us now to get started.
Have Questions? Give us a Call!
(713) 928 3437If you have any questions about the products, quotes, or desire any additional information please get in touch. One of our Dale representatives will reach out to you shortly to address any of your concerns or inquiries.
"*" indicates required fields